Spring Safety Valve

The service life of the spring safety valve is long, and it generally does not need to be disassembled. For normal use, please pull the bail to ensure smooth operation. If it is due to air leakage or failure, please disassemble or replace it in the order shown in the diagram.

Put the pot cover right, screw out the nut with a tool or hand, remove the bail, remove the valve element and spring, and then replace them in reverse order after cleaning. Be careful not to miss the paper pad.

Replacement method of sealing rubber ring of float valve:

If the sealing rubber ring is damaged and leaks, please replace it as follows:

Press the valve stem gently with one hand, then screw out the nut with the other hand in a counterclockwise direction, take out the bad rubber ring, replace it with a new rubber bowl, and screw back the screw plug in a clockwise direction.